BCMTB - SPRAY PRIMERS 8070 LINE
- MSDS: BCMTB
- Manufacturer: ZYNOLYTE PRODUCTS INC
- Product Name: SPRAY PRIMERS 8070 LINE
- National Stock Number: 8010-00N006430
Product Identification
Product ID:SPRAY PRIMERS 8070 LINE
MSDS Date:01/01/1985
FSC:8010
NIIN:00N006430
MSDS Number: BCMTB
Responsible Party
Emergency Phone: 213-604-1333
Cage: 25461
Contractor
Telephone: 310-513-0700
Cage: 25461
Ingredients
TOLUENE (SARA III)
CAS: 108-88-3
RTECS: XS5250000
Fraction By Weight: <5%
OSHA PEL 200 PPM/150 STEL
ACGIH TLV: 50 PPM; 9293
EPA Report Quantity: 1000 LBS
DOT Report Quantity: 1000 LBS
AROMATIC HYDROCARBON SOLVENT
Fraction By Weight: 9%
ACGIH TLV: 100 PPM (MFR)
ALIPHATIC HYDROCARBON SOLVENT
Fraction By Weight: 6%
ACGIH TLV: 500 PPM (MFR)
ISOBUTANE AND PROPANE PROPELLANT
Fraction By Weight: 27%
METHYLENE CHLORIDE (SARA III)
CAS: 75-09-2
RTECS: PA8050000
Fraction By Weight: 40%
OSHA PEL 500 PPM/C,1000; Z2
ACGIH TLV: 50 PPM, A2; 9192
EPA Report Quantity: 1000 LBS
DOT Report Quantity: 1000 LBS
Hazards
Effects of Overexposure:EYE: IRRITATION. VAPORS: ANESTHETIC,IRRIT OF
RESP TRACT,ACUTE NERVOUS SYSTEM DEPRESSION,COMA,DIZZY
First Aid
First Aid:EYE: FLUSH WITH WATER 15 MINUTES, CONSULT PHYSICIAN.
INHALATION: REMOVE FROM EXPOSURE,GIVE ARTIF RESP IF NEEDED,CALL
PHYSICIAN.
Fire Fighting
Flash Point:135F/57C
Lower Limits:1.0
Extinguishing Media:FOAM,CARBON DIOXIDE,DRY CHEMICALS
Fire Fighting Procedures:SELF-CONTAIN BREATH APP,WATER FOG TO COOL
EXPOSED CONTAINERS
Unusual Fire/Explosion Hazard:CLOSED CONTAINERS MAY EXPLODE WHEN
EXPOSED TO EXTREME HEAT DUE TO PRESSURE BUILD UP
Accidental Release
Spill Release Procedures:SECURE SOURCES OF IGNITION. VENTILATE AREA.
CONTAIN SPILL & REMOVE WITH INERT ABSORBENT AND NON-SPARKING TOOLS.
Handling
Handling and Storage Precautions:DO NOT STORE ABOVE 120F/48C. DO NOT
SMOKE,WELD,FLAME CUT OR BRAZE IN AREA OF USE.
Exposure Controls
Respiratory Protection:NIOSH/MSHA APPROVED RESP DEVICE IN ACCORD WITH
EXPOSURE OF CONCERN.
Ventilation:LOCAL/MECHANICAL
Eye Protection:SAFETY EYEWEAR W/SIDESHLD
Supplemental Safety and Health
Chemical Properties
Vapor Density:>1
Spec Gravity:0.850
Evaporation Rate & Reference:>1 (ETHER)
Percent Volatiles by Volume:80
Stability
Stability Indicator/Materials to Avoid:YES
Stability Condition to Avoid:TEMP ABOVE 120F/48C.
Hazardous Decomposition Products:HCL,PHOSGENE
Disposal
Waste Disposal Methods:COMPLY WITH LOCAL, STATE AND FEDERAL
REGULATIONS. DO NOT INCINERATE CLOSED CONTAINERS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.